man down alarm
man down alarmMan down alarm is provided by CISCOR using the powerful DEVI 9000 software security engine.
man down alarm: man down alarm
There is a lot of recent interest in man down alarm.
This website has information about man down alarm...
If you are still interested in man down alarm, please click on our link above.
This provides an extremely reliable emergency man down notification system (lone worker alarm). The Sentry system activates the emergency man down alarm notification (lone worker alarm) when a wireless pendant finds itself in a horizontal position (i.e. the person carrying it inhales toxic fumes or is attacked and falls to the ground). The lone worker - man down alarm system transmitter beeps for a short amount of time to signal the wearer that an alarm is about to be transmitted. Wireless repeaters provide the framework of the Sentry emergency man down system - lone worker security system. As an option, emergency man down notification system pendants may be equipped with a high security pull lanyard that activates the system pendant should an attempt be made to forcibly remove it from the person carrying it. Employee's lives depend on the emergency man down notification - lone worker system. This is done by randomly hopping through many different frequencies spread over a wide radio spectrum. The warning beeper works to avoid false alarms for non-emergency events such as picking a tool up off the ground. Many commercial and industrial facilities need notification that a staff person has fallen as the result of an environmental hazard or threat. The Sentry uses state-of-the-art spread spectrum frequency hopping RF technology. The military first developed this technique to eliminate interference and jamming of important radio traffic. Intelligent repeaters have a line-of-site range of about 2500 feet (outdoors and no obstacles). The CISCOR Sentry system constantly monitors all pendants, locators and repeaters for operational readiness. Wireless repeaters are totally wireless and require only a standard 110 vac outlet or attach them to photovoltaic solar panel. If a wireless pendant has been hit too often and stops working, the system software will generate a supervisory alert indicating which device should be checked. It also leverages the power of the transmitters. Wireless locators can be installed in key places such as store rooms, work rooms, hallways, gathering rooms, parking lots and garages, walking trails or any place where location of a person in trouble is required. No wiring is required for locators except for a standard 110vac plug. The Sentry can operate with ten times more power in the 900 MHz band than older low band narrow channel systems. Low battery conditions are also indicated approximately 2 weeks prior to battery failure. The Sentry system by CISCOR utilizes wireless pendants that notify the proper emergency response persons if the employee becomes unconscious or injured. The pull lanyard is useful for psychiatric wards and corrections facilities. If interference occurs in one part of the radio spectrum, the signal can still get through in another part. This assures the highest level of dependability that is available with today's cutting edge technology. Long range capability allows for expansive facilities and campuses to be effectively secured. The Sentry system will provide the location of the person who has activated their wireless pendant. Because lives are at stake, supervision of the pendants and system components vital. As an option, locators may be fitted with a solar panel.
man down alarm